Raked Walls Using Pitch Calculator

Construction
1 minute

Calculate the wall height at the long point, the length of the top plate, the stud position on the plate with 450-mm intervals, based on the angle of the rake (pitch).

Constructing a raked wall requires precise measurements of the wall height at the long point, the length of the top plate, and the stud position on the plate. Get all the necessary calculations using the following online tool. The calculator is based on the measurement of the angle of the rake or pitch, generating a list of studs spaced at 450-millimeter intervals.

Height at Short Point
mm
Angle of Rake (Pitch)
°
Bottom Plate Length
mm
Bottom Plate Thickness
mm
Top Plate Thickness
mm
Send the result to an email


    47 Number of calculations
    |
    |